Directional Drilling Blades - Trenchless Technology Solution

Tungchip Hardfacing

Tungchip hardfacing is a technique where tungsten chip is directly deposited onto the weld matrix of the hardfacing material.
This provide excellent toughness and superior wear resistance for prolonged tool life.

Now available on all our blades as standard.

The Crocodile

This blade provides one of the most cost effective solutions for drilling in Hard Pack Clay and Rocky ground conditions.

These blades provide reduced torque in hard ground conditions, which means you require less power, this saves tool life, wear and tear on your machine.

Surrated Carbide blades for cutting the hardest conditions
Taped design to reduce torque in compact ground conditions
Additional hardfacing and extra-wear protection

Crocodile
	Part #
For Vermeer® bolt pattern, 7 Hole, 3" cut, suit D7x11	BCV80
For Vermeer® bolt pattern, 7 Hole, 4" cut, suit D16x20, D20x22, D24x40	BCV100
For Ditch Witch® bolt pattern, 5 Hole, 4" cut, suit JT1720, JT2020, JT2720	BCD100

Bear Claw
	Part #
For Vermeer® bolt pattern, 7 Hole, 3.5" cut, suit D7x11	BBV80
For Vermeer® bolt pattern, 7 Hole, 4" cut, suit D16x20, D20x22, D24x40	BBV100
For Vermeer® bolt pattern, 7 Hole, 5.25" cut, suit D24x40	BBV125
For Ditch Witch® bolt pattern, 5 Hole, 4" cut, suit JT1720, JT2720	BBD100

The Bear Claw

The Bear Claw is a must for any directional drillers tool box. The cutting teeth on this directional drilling blade provides great cutting action in pinnacle limestone and other mixed ground conditions. Balistic carbide cutters allow ripping through tough rock, whilst still providing great steerability in sandy and soft ground conditions.

Carbides cutter shred through the hardest soil
Hardfacing along all wear edges improve blade life
Hole in blade allows direct pullback for small packages
Made from hardest bissaloy steel for high wear resistance

The Sand Blade

This directional HDD bit is ideal for sand and loam soil conditions.

An economical long lasting blade that continues to perform in sandy ground conditions.

Hardfacing along all wear edges improve blade life
Made from bisalloy plate for high strength and wear resistance
Tungchip hardfacing for maximum wear resistance

Bear Claw
	Part #
For Vermeer® bolt pattern, 7 Hole, 3" cut, suit D7x11	BSV80
For Vermeer® bolt pattern, 7 Hole, 4" cut, suit D16x20, D20x22, D24x40	BSV100
For Ditch Witch® bolt pattern, 5 Hole, 4" cut, suit JT1720, JT2020, JT2720	BSD100

Take The Next Step!